- Welcome to Metal Type Forum.
Metal Type: Home | Library | Forum | Free Ads | Store
Posted by Mechanic
- January 22, 2021, 10:57:01 AMHi Dav,
Yes it is possible to fit a Mohr saw to an Intertype C4, we have a C4 with a Moh saw. I have fitted a number of the saws to Linotype machines but that was back in the sixties. I uploaded a manual for the saw to Archives.org. It does not tell you how to install the machine but it may be of some help. As I recall the there are some modifications to the knife block and the ejector and you have to fit the Mohr saw measure control. I believe the saw would have to be for an Intertype to accommodate the differences between Linotype and Intertype. URL below
https://archive.org/details/MohrManual
Dave Seat at Hotmetal Services would be a good man to contact. URL
https://www.hotmetalservices.com/
Yes it is possible to fit a Mohr saw to an Intertype C4, we have a C4 with a Moh saw. I have fitted a number of the saws to Linotype machines but that was back in the sixties. I uploaded a manual for the saw to Archives.org. It does not tell you how to install the machine but it may be of some help. As I recall the there are some modifications to the knife block and the ejector and you have to fit the Mohr saw measure control. I believe the saw would have to be for an Intertype to accommodate the differences between Linotype and Intertype. URL below
https://archive.org/details/MohrManual
Dave Seat at Hotmetal Services would be a good man to contact. URL
https://www.hotmetalservices.com/
Posted by Dave Hughes
- January 18, 2021, 09:01:16 AMI've been contacted by Colin who would like to know if it is possible to fit a Mohr saw to his Intertype C4.
Anyone done it?
Anyone done it?
Printers' Tales - Over 30 stories from the pre-digital age. Buy now on Amazon/Apple Books
☛ Don't miss our illustrated newsletters. Click here to see examples and subscribe. ☚
